Reusable filter for pumping of oils - emulsions - fuels from barrel.
The suction filter is equipped with a 100µ large surface - corrugated metal mesh. In this way the suction and pre-filtering process is achieved in one go.
- Avoids excessive wear of pump
- Avoids premature clogging of a subsequent filter with large particles
- Avoids clogging of rotor-nozzles in a centrifuge
- Increases the effectiveness of the cleaning process in a centrifuge or any subsequent final filter
- No more prefilters necessary
- Easy inspection for cleaning
Components of the kit:
- 1 hose connector ( 3/4" 13mm)
- 1 suction filter with metal mesh and Nylon casing
- In case of filtering with the centrifuge by circulation on the same barrel let the suction filter float towards the bottom
- In case of filtering the oil by transfering from one barrel to the next - install the suction filter with a floating aid appr. 10 cm below the surface
- In case of centrifuging WVO or other very dirty oils a prefiltering with a metal sieve or a bag of 500µ is advised
- Periodical inspection of the suction filter and cleaning is necessary
- Clean filter by applying flow in opposite direction(i.e. inside out for cleaning) with cleaner or Diesel
Complete kit with hose - 2 suction filters etc.