Untitled Document
Kit for suction of oils from barrel with pre-filter 100µ
All necessary components to connect the gear-pump with the barrel inlcuded , the suction filter is equipped with a 100µ large surface - metal mesh. In this way the suction and pre-filtering process is achieved in one go.
Advantages:
- Avoids excessive wear of gears in the pump
- Avoids clogging of rotor-nozzles in the centrifuge
- Increases the effectiveness of the cleaning process in the centrifuge
- No more prefilters necessary
- Easy inspection for cleaning
Components of the kit:
- 3 meters PVC suction hose with spiral reinforcement to avoid contraction of hose max temp 65°C
- 2 hose connectors for the pump and prefilter side (1" - 13mm, 3/4" 13mm)
- 1 suction filter with metal mesh and Nylon casing
- 2 steel hose clamps
Useful hints:
- In case of filtering with the centrifuge by circulation on the same barrel let the suction filter float towards the bottom
- In case of filtering the oil by transfering from one barrel to the next - install the suction filter with a floating aid appr. 10 cm below the surface
- Do not overbend the hose
- Adjust hose length to individual need
- In case of centrifuging WVO or other very dirty oils a prefiltering with a metal sieve or a bag of 500µ is advised
- Periodical inspection of the suction filter and cleaning is necessary
- Clean filter by applying flow in opposite direction(i.e. inside out for cleaning) with cleaner or Diesel
|