Centrifuge Invert 50 -Filtration KIt with Pump

Item Number: 4076
Shipping: Worldwide
Availability

Centrifuge kit, including all critical components for a professional filtration under 1µ (Micron)
The kit allows either filtering with the centrifuge or pumping between barrels of all oils, and has become a standard in the waste-oil community over the last 10 years.

• Suction hose Ø13mm 3.5 meters length - spiral reinforcement to prevent collapse on suction lines
• Delivery pressure hose Ø10 mm 1.5 meters length max 12 bar-reinforced from pump to centrifuge
• Return hose for pressure adjustment Ø10mm 3 meters length
• High performance gear pump-details below
• Invert centrifuge 50 details below
• All connectors, clamp hoses and T-connectors at pump, centrifuge and suction filter
• Ball valves for pressure regulation
• Ball valve for switching between pumping and centrifuge operation.
• Pressure meter silicon filled
• Suction filter 90µ for protection of gear pump

Specification gearpump:

• Max 450 LPH or 140 GPH
• Operating range: -20°C - 80°C
• Connections IN and OUT 1" IG
• 230 V 0.55 kW Asyncroneous - selfventilating - protection IP55
• 1450 RPM
• Maximum Pressure 12 Bar 170 PSI
• Adjustable By-Pass Valve
• Gears made from sintered steel for continuous operation
• Shafts made from hardened steel
• Dimensions: 350 x 200 x 280 (l x h x w)
• Weight: 9kg
• Max Viscosity 2000 cst

Specification of Centrifuge:

The 50 centrifuges with inverted rotors simply outperform other centrifuges with regular centrifuges having the nozzles at the bottom

• G- Force at rotor wall
• Dirt Collection Capacity
• Water retention

Advantages

• No more plugged filters-filter bags
• Cleans waste oils(see below) effectively from particles up to 1 micron
• Inverted rotor permits up to 750 cc of dirt collection capacity, superior to similar models
• Inverted rotor allows for collection of water in rotor as no back flow is possible when rotor stops
• The highest possible G-Force at rotor wall: 4100 G, no other centrifuge in this category offers comparable values

Details Specification:

• Height- diameter: 190mm(allow for free space of 300mm!) -143mm
• Max particle tolerance 250 Micron - prefiltering is necessary before pump(suction filter or filter bag)
• Min-Max pressure: 2 - 7 Bar
• RPM at different pressure: 3 Bar – 5500 RPM, 5 Bar – 8200 RPM, 7 Bar - 9100 RPM
• Requires pump to produce necessary pressure for centrifugal force
• Maximum contaminate storage 750 cc
• Inlet thread: M16 x 1.5
• For best separation oils should be heated to approximately 50°C
• Use 3 port valve to adjust pressure reaching the centrifuge do not exceed 7 Bar
• Pre filter oil to a minimum of 250 microns before pumping the oil

Waste oils:

• Grease from cooking
• Waste vegetable oil from restaurants
• Fish oil from the food industry
• Engine oil in farming equipment
• Hydraulic oil in construction machinery, mining etc.
• Gear oil in rolling mills and wind power stations
• Lubricating oil in saw mills
• Pump oil for suppliers
• Crude oil in oil reprocessing