Bild Centrifuge Invert 50 with Pressure Regulation | Greenbull Motors GmbH Centrifuge Invert 50 with Pressure Regulation | Greenbull Motors Gmbh Centrifuge Invert 50 with Pressure Regulation | Greenbull Motors Gmbh Centrifuge Invert 50 with Pressure Regulation | Greenbull Motors Gmbh Centrifuge Invert 50 with Pressure Regulation | Greenbull Motors Gmbh Centrifuge Invert 50 with Pressure Regulation | Greenbull Motors Gmbh

Centrifuge Invert 50 with Pressure Regulation

€ 402,00 Prices incl. VAT

Item Number: 4063
Shipping: Worldwide
Availability

Centrifuge with maximum flow rate 100 Gallons per hour or 400 litres

The 50 centrifuges with inverted rotors simply outperform other centrifuges with regular centirfuges having the nozzls at the bottom - in the most relevant criteria

  • G- FORCE AT ROTOR WALL
  • Dirt Collection Capacity
  • Waterretention


This kit is delivered with connectors - 2 port valve regulator -pressure gauge, mounting bolts (no mounting bracket).

A high quality gear pump creating a minimum of 7 bar pressure in continuous operation and a minimum of 200 LPH is required.

A complete kit with all components and gear pump is available from this web site.

Advantages

  • No more plugged filters-filter bags
  • Cleans waste oils(see below) effectively from particles up to 1 micron
  • Inverted rotor permits up to 750 cc of dirt collection capacity, superior to similar models
  • Inverted rotor allows for collection of water in rotor as no back flow is possible when rotor stops
  • The highest possible G-Force at rotor wall: 4100 G, no other centrifuge in this category offers comparable values


 

 

Details Specification:

  • Height- diameter: 190mm(allow for free space of 300mm!) -143mm
  • Max particle tolerance 250 Micron - prefiltering is necessary before pump(suction filter or filter bag)
  • Min-Max Presure: 2 - 7 Bar
  • RPM at different pressure: 3 Bar - 5500, 5 Bar - 8200, 7 Bar - 9100
  • Requires pump to produce necessary pressure for centrifugal force
  • Maximum contaminate storage 750 cc
  • Inlet thread: M16 x 1.5
  • Kit includes: Centrifuge, 2 Port Ball Valve, connectors, oil filled pressure gauge(see picture)


Operational Aspects:

  • For best separation oils should be heated to approximately 60°C
  • Use 3 port valve to adjust pressure reaching the centrifuge do not exceed 7 Bar
  • Prefilter to a minimum of 250 microns before pumping the oil


.

Waste oils:

  • Grease from cooking
  • Waste vegetable oil from restaurants
  • Fish oil from the food industry
  • Engine oil in farming equipment
  • Hydraulic oil in construction machinery, mining etc.
  • Gear oil in rolling mills and wind power stations
  • Lubricating oil in saw mills
  • Pump oil for suppliers
  • Crude oil in oil reprocessing
  • Base oil in oil production
  • Compressor oil in plants
  • Cooling lubricating oil for machine tools
  • Fuel oil in heating plant
  • Transformer oil in power stations and substations
  • Vegetable oil in biodiesel production
  • Rapeseed oil as fuel
  • Palm oil in plant strength-work
  • Sun flower oil for animal feed
  • Linseed oil for wood preservation and colour
  • Coconut oil in cosmetics
  • Roast oil in restaurants
  • Grease from cooking
  • Waste vegetable oil from restaurants